How To Clean The Epoxy Floor?

There is a myriad of reasons why commercial and residential property owners are enthralled by epoxy floors. The most obvious motive is the fact that flooring made of epoxy can be put in wherever concrete is present to make the concrete floor more durable and last longer. 

If you don’t follow the right cleaning procedure, just like any other thing flooring, it can become deteriorated with time. The good thing about epoxy floors is that they are simple to maintain, clean, and keep clean. The greatest part is that you do not require extensive training to clean your floors made of epoxy. 

If you’re cleaning the epoxy floor of garage floors or a commercial kitchen or in a warehouse with a lot of activity and warehouse, you can do it effortlessly and in less time in comparison with other floor options such as tiles or carpet.

Steps to Clean The Epoxy Floor

Cleansing your epoxy floor is crucial to keep its shine and extend its life. Let’s look at the steps you need to take to clean your garage flooring. This guide will help you with the proper installation of epoxy floor coatings. 

If you’re not sure what floor coating you are using contact the experts from Paradigm Concrete Finishes for help. You can search companies on near to you that provide buffing and floor cleaning services for industrial and residential properties.

Remove dirt and other debris

Garage floors are prone to collecting dust and dirt if the floor is located in an area with lots of traffic. The windy, dusty conditions and the summer months also cause this problem. 

If you allow dust and other debris to remain on your floor, it’ll get stuck in the floor and cause scratches as you move, shift your equipment, or drive. In time, you’ll end up with severely scratched floors without the original gloss.

To keep your garage’s floors free of grit and dirt invest in a high-quality dust mop. The tool is able to do the majority of the cleaning, so it is of the highest quality that you can afford. 

Use the dust mop at least once each week to sweep the floor toward the entrance. You may also clean more frequently depending on the speed at which your floors become dirty.

If your floor is constructed with contraction joints, dirt may have been entrapped within the curves. Use a vacuum and clean the joints to get rid of dirt. If you’d like a tidy epoxy floor, make sure you keep on top of the build-up each month, and it will never be to the point that you have to replace the entire epoxy flooring.

If you don’t own an air vac, you can employ a broom for every corner and scrub the dirt. Before moving any heavy machine or object over your floor, make sure that you wash away all dirt and grit, so that it doesn’t settle into the floor.

Cleaners for epoxy floors

It is possible to use hot water to make a gallon for a tough mop, together with a basic green and ammonia. It is best to stay clear from vinegar-based citrus-based solutions as they may leave streaks. A majority of people are advised to stay clear of soap-based cleaners due to two reasons.

One they create a haze each when you use them. This can build up over some time, taking away the shine off your flooring. The soap residue may cause your floor to become slippery when it touches water, which can be dangerous for those who use it.

If you must make use of soap, you can make use of moderate soap or soft soap in combination with water to remove difficult spills. Make sure you wash your floors with plenty of clean water once you’re done cleaning.

Make sure to spot clean the floor whenever the need arises

Although you could plan to vacuum once a month and mopping once per week, there’s plenty that can happen in the garage (out of the norm) needing immediate cleaning. If you spill something onto the floor, don’t be left to the next time you clean. Make sure you spot clean the floor to prevent any potential problems at the earliest opportunity. 

Vacuum the dirt away, then mop it with warm water, then dry it. The garage floor made from epoxy is simple to clean whenever any type of spill happens. Make sure you have some rags to clean the floor each time an incident of liquid spills occurs.

Quality Epoxy

If for some reason you’re confronted with tough stains and marks, you’ll have to scrub the area. Make use of a kitchen sponge and warm water, then scrub the stain to keep your surroundings as clear as you can. When the stain seems persistent and you are tempted to apply steel wool, but not to do it.

The steel wool can be too rough for floors with epoxy. For the same reason beware of harsh chemicals such as a comet. Avoid using citrus cleaners or vinegar as they may degrade the chemical composition of epoxy floors, which can cause wear and wear and tear.

The soft kitchen sponge, as well as water, are all you need to gently scrub and wash any epoxy stain. If the first attempt fails you can try a different one.

You should also check: 

How do you clean Chemicals and oil

In the case of what kind of flooring with the coating of epoxy placed on it is possible to have chemical spills. The good news is that the nature of epoxy floors makes them easily cleaned. All you require is newspaper towels or shop towels to clean them. 

What you must keep in consideration is to never let the chemical substances remain on the floor for too long. The chemicals found in engine oils and other chemicals that you’ll find in garages could easily cause damage to your floor if they remain there for long periods of the course.

Other spills you need to get rid of promptly include acids, household cleaners, and paint. Make use of a towel to clean the spill. After that, rinse the area with clean water to ensure that no chemical residues remain in the water.

Clean off the tire marks

There are chances of getting tire marks caused by the movements of your bike or vehicle. The easiest method of removing the marks on your floor is applying a degreaser. By using this method, you won’t need to scrub or scratch your flooring. 

It assists in removing the tire marks off the floor and then turns into a powder that can be swept or mopped off. What you have to do is grab the degreaser, then drip it onto your tire’s marks. Allow it to sit for 10 minutes before you soak it in, but it could take longer in the case of heavy marks. 

It will dry into a powdery substance that you can use to sweep in, then collect, and dispose of. Another alternative is gently rubbing the floor using a soft nylon brush. If the tire marks persist you can repeat the procedure as many times as it takes.

Prevention is more effective than Floor Coating Failure

The lessons of life have taught us to avoid bad things before they occur. The same principle can be applied to your floors made of epoxy. To keep the floor from being scratched use mats or plywood, you can use them to move heavy objects around. If you are planning to join your garage, make sure you use a mat for welding to protect the flooring. 

If you’re moving your vehicle or other items using jacks, place small pieces of wood under them to prevent dents from forming on the floor.

If your flooring has lost its shine and has become uglier over time, you should use a waxing agent to give it a boost of protection. A floor that has been waxed is much simpler to scrub than a dirty one.

Reach Paradigm Concrete Floor Finishes for high-quality garage floor installations

Epoxy garage floors aren’t only durable, but also easy to maintain and clean. If they’re installed correctly they will last for many years to come. However, to fully benefit from their use you must make sure you are investing in high-quality installations that Paradigm Concrete Finishes. 

At this time, we offer garage floor epoxy that is contactless to ensure everyone is secure and healthy. If you’d like your floor to be coated with epoxy your floors, or refreshed, we could assist you. Reach us out to get answers to all your questions and get a start on your project as quickly as possible.

Sharing Is Caring: